• L: 21’ 4” (6.50 m) W(shipping): 7’ 8” (2.33 m) H: 9’ 7” (2.90 m)

  • Tier 3 - 110 hp (82 kw) @ 2,100 RPM

  • Weight: 17,960 lbs (8,146.5 kg)

Dimensions

  • Length: 21’ 4” (6.50 m) 
  • Width (shipping): 7’ 8” (2.33 m)
  • Height: 9’ 7” (2.90 m)
  • Wheelbase (front tire to mid-tandem) : 15’ 3” (4.66 m)

Engine

  • Tier 3 - 110 hp (82 kw) @ 2,100 rpm Cummins turbo diesel engine
  • Water-cooled, EPA certified
  • 4 cylinders, 270 cid (4.4 l)
  • Electric start
  • Fuel reservoir: 35 gallons (132 l)
  • Hydraulic system: 21 gallons (79 l)

Weight

  • Total weight: 17,960 lbs (8,146.5 kg)
  • Rear: 12,600 lbs (5,715.2 kg)
  • Front: 5,360 lbs (2,431.2 kg)

Battery

  • Two 12 volt batteries

Traction Drive

  • Hydrostatic drive using a hydrostatic pump, drives a variable displacement hydrostatic motor that powers a two-speed tandem axle
  • Variable volume hydrostatic drive system provides infinite speed selection in each of the two speed ranges
  • Working range: @ 2,100 rpm 0-10 mph (0-16 mph)
  • Travel range: @ 2,100 rpm 0-20 mph (0-32 kph)
  • Tandem oscillates ± 15⁰
  • Choose between tandem and all-wheel drive
  • Dana style gear tandem driven, not chain

Tires

  • Six 15 x 19.5, TL, G-2
  • 8 ply
  • Pneumatic tires

Brakes

  • Foot operated primary and service brakes
  • Secondary brake accomplished by dynamics of hydrostatic traction drive system
  • Hydraulic parking brakes, internal element of the planetary final drive unit, actuated by a selector valve
  • Spring applied parking brakes automatically actuated when the ignition switch is in off position

Front Axle

  • Fully welded steel, tubular design
  • Oscillation: 40⁰ total, supported by tapered roller bearings and bushings
  • Wheel lean: 10⁰ left or right (20⁰ total)
  • Clearance: 22” (.559 m)

Blade Lift Mechanism

  • Each trunnion is mounted to the frame by dual tapered roller bearings in sealed housings

Blade Range

  • Lift above ground: 12” (.304 m) 
  • Pitch at ground: 45⁰ tilt
  • Blade slide: 36” (.914 m) left or right

Moldboard

  • Length: 10’ (3.04 m)
  • Height: 21” (.533 m), controlled by two hydraulic cylinders mounted to ball joints at turntable
  • Cutting edge thickness: .625” (16 mm)
  • Replaceable end bits and cutting edge standard equipment
  • Cuts 17” (.43 m) below grade

Moldboard Turntable

  • Circle centered with three adjustable alignment blocks with removable shims
  • Diameter: 3’ 3” (.838 m)
  • Circle rotates 90⁰ by two hydraulic cylinders

Instrumentation

  • Fuse panel
  • Fuel gauge
  • Voltmeter
  • Engine oil pressure gauge
  • Hour meter
  • Tachometer
  • Automatic shutdown for low oil pressure or high water temperature
  • Hydraulic oil level, sight gauge with temperature
  • Air filter restriction indicator

Drawbar

  • 4” (101.6 mm) x 4” (25.4 x 101.6 mm) solid

Articulated Frame

  • Steel channel, rectangular tubing
  • Articulated 24⁰
  • Pivot 4” (101.6 mm) diameter, supported by 4 tapered roller bearings
  • Turning radius: 21’ 5” (6.527 m) from center to outside front tire with frame articulated

Operator's Area

  • Fully cushioned, adjustable suspension seat with seat belt
  • Adjustable console controlling left and right-hand blade lift, front blade lift, moldboard side shift, moldboard tilt, circle turn, circle shift, articulation, front wheel lean and rear mount attachment control
  • Console provides the operator control of steering
  • All gauges are easily readable

Additional Standard Equipment

  • Moldboard float control
  • Fail safe brake
  • Backup alarm
  • Front and rear turn signals
  • Four-way flashers
  • Head lights and work lights
  • Full fabricated cab , includes heater, defroster, air conditioner, radio, front and rear window wipers
  • Audible warning low oil and water temperature
  • Safety beacon
  • Horn
  • Cup holder
  • Vandalism package

Options

  • Water jacket heater
  • Rear mount scarifier (in lieu of front)
  • 7’ (2.13 m) front blade with 4 shank scarifier
  • 8’ (2.43 m) front blade with 4 shank scarifier
  • 11’ (3.35 m) moldboard
  • 12’ (3.65 m) moldboard
  • Foot accelerator
  • Front tow hitch on blade [must order 7’ (2.13 m) or 8’ (2.43 m) front blade]
    - Foot operated FNR pedal

Training, Support and Company

  • Training and support manuals
  • Optional on-site operator training by Dealer
  • One-year, unlimited hours warranty against any manufacturer defects
  • Extended warranty available
  • 50+ years manufacturing experience
  • ISO 9001 Certified
  • Manufactured in the USA

Job Application

  • Shaping shoulders, slopes and ditches
  • Removing compacted material
  • Building pad construction
  • Smooth finish grader

Key Features

  • Wheel lean, articulation and twin flow
  • Hydraulics and all-wheel drive option
  • Scarifier
  • Hydrostatic transmission
  • Topcon available
  • Pressurized, heated and cooled cab option

What our customers are saying

“They put out a very great product. We have a LeeBoy paver and roller. Best of the best right there.”

- Brandon Hersey, Massachusetts, USA

“I have been laying asphalt for 32 years now. I come from a time when we used to lay asphalt with a ‘dragbox’. I used to dream of a machine like the LeeBoy paver. In my opinion there is no better or labor-friendly machine like the LeeBoy. From the 1000 to the 8515, the work output and quality is simply unparalleled.”

- Frank Cidade, Cidade Blacktop, Massachusetts, USA

“I've been paving for 3 generations, the absolute best investment we made as company was buying a LeeBoy. If you’re thinking about buying one, stop thinking and make best decision of your life. Thank you LeeBoy. I will be spreading the word!”

- Don Hopkins, D&H Paving, New Jersey, USA

“My old 8515 laid 510 ton on a church lot in Hopkinsville, KY today. Ain’t even broke a sweat yet, might even stop and do a small drive on the way home. Suns up, “Sons” working. Still as sweet today as the day l bought it.”

- Randy Bennett, Bennett & Sons Paving, Kentucky, USA

“It's nice to see that there are still some American companies out there making equipment that last long and works well. We will definitely be purchasing more equipment from LeeBoy in the future.”

- Scott Flores, Empire Parking Lot Services, California, USA

“My family business has been using LeeBoy for three generations. When it comes to asphalt, SMI Paving is “LeeBoy Proud” always!”

- Jack Smith, SMI Paving, South Carolina, USA

“Best paver made in the USA. Parts always available. Designed with the paving man in mind. LOVE IT. Other pavers to me are not an option.”

- Alan Taylor, Connecticut, USA

“Best paver made in the USA. Parts always available. Designed with the paving man in mind. LOVE IT. Other pavers to me are not an option.”

- Alan Taylor, Connecticut, USA

Find a Dealer Near You