• Wheelbase: 14’ 4” (4.36 m)

  • Tier 3 - 110 hp (82.02 kw) @ 2,200 RPM

  • Weight: 24,500 lbs (11,113 kg)


  • Length: 25’ 6” (7.77 m) 
  • Width (shipping): 10’ 10” (3.3 m)
  • Height: 8’ 1” (2.46 m)
  • Wheelbase: 14’ 4” (4.36 m)
  • Total weight: 24,500 lbs (11,113 kg)


  • Tier 3 - 110 hp (82.02 kw) @ 2,200 rpm Cummins turbo charged diesel
  • Water-cooled 
  • Battery: 12 volt, 120 amp alternator
  • Electric start
  • Fuel reservoir: 68 gallons (257.4 l)

Strike Off

  • Contoured strike off for controlled spread of material width, depth and slope with minimum side draft and minimum segregation of materials
  • Basic strike off consist of two 1’ (.304 m) and two 3’ (.91 m)
  • Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope
  • Outer edger plate assembly included


  • Hydraulically adjustable front hopper lip, adjustment range of 7” (177.8 mm) maximum
  • Two bearing equipped push rollers, truck entry 9’ 3” (2.81 m)

Traction Drive

  • Front wheel hydrostatic planetary drive with electric hydraulic controlled two-speed motor
  • Independent hydraulic pumps for each planetary drive motor
  • Pumps are interconnected to synchronize drive system
  • Infinitely variable throughout both operating ranges
  • Full reverse in both speed ranges
  • Low range: @ 1,800 rpm – 0 to 1.8 mph (0 to 2.89 kph)
  • @ 2,200 rpm – 0 to 2.1 mph (0 to 3.37 kph)
  • High range: @ 1,800 rpm – 0 to 7.8 mph (0 to 12.55 kph)
  • @ 1,800 rpm – 0 to 9.8 mph (0 to 15.77 kph)

Hydraulic Reservoir

  • 42.5 gallons (160.8 l)

Operator’s Controls

  • Dual control stations, each equipped with:
    - Direction and speed control lever
    - Foot actuated conveyor function switch
  • Control functions on the operator’s console include:
    - Main power
    - Starter throttle
    - Horn
    - Conveyor speed
    - Shuttle and discharge direction
    - Strike off lift and lateral movement
    - Hopper lip position
    - Steering
    - Parking brake
  • Analog gauges for engine oil pressure, water temperature, voltmeter and hydraulic oil temperature, digital tachometer and hour meter
  • Main power and starter switches, tail light switch and engine governor control located on the lockable engine instrument panel

Conveyor System

  • Independent, variable speed, hydrostatic, dual end drive system
  • Two high torque, direct drive hydraulic motors
  • Conveyor speeds: 0 to 466’ per minute (142 mpm)
  • Discharge speed controlled with conveyor speed control knob on operator’s console
  • On/off function controlled with foot switch located at each control station
  • Conveyor belt: 21” (.533 m) wide, high-temperature service nitrile belt traveling on tapered roller bearing support rollers
  • Equipped with adjustable wipers to prevent material build-up
  • Conveyor assembly able to extend and retract up to 4.75” (120 mm) hydraulically 
  • Control the direction of conveyor discharge of material at operator’s console from either side of machine


  • Hydrostatic traction drive primary braking
  • Parking brake controlled by electric switch on operator’s console
  • Failsafe parking brake


  • Four 385/65 R 22.5 radial
  • Hydro-inflated, pneumatic tires

Oscillating Push Rollers

  • Two bearing equipped push rollers
  • Mounted on a 9’ 3” (33.83 m) wide oscillating frame
  • Compensates for minor directional misalignment of truck with widener

Optional Equipment

  • Dual strike off group
  • 3’ (.91 m) screed strike off with vibration
  • 6’ (1.82 m) screed strike off with vibration
  • 3’ to 6’ (.91 to 1.82 m) hydraulic strike off extension, right or left
  • 2’ (.6 m) crownable strike off attachment
  • 1’ (.3 m) contoured strike off section
  • 3’ (.91 m) contoured strike off section
  • 6’ (.1.82 m) contoured strike off section
  • 2’ to 3’ (.6 to .91 m) telescoping contoured strike off section
  • Single grade, sonic, TopCon P-32 system
  • Single grade and slope, sonic, TopCon P-32 system
  • Dual grade and slope, TopCon P-32 system
  • Four-wheel steering
  • Washdown system with hose reel and 7 gallon (26.4 l) tank
  • Second operator’s seat
  • 6.5 kW generator with two 120V AC accessory power outlets
  • Rear-wheel power assist
  • Second hose reel kit
  • Belly mounted broom
  • Umbrella
  • Truck hitch

Training, Support and Company

  • Training and support manuals
  • Optional on-site operator training by Dealer
  • One-year, unlimited hours warranty against any manufacturer defects
  • Extended warranty available
  • 50+ years manufacturing experience
  • ISO 9001 Certified
  • Manufactured in the USA

Job Application

  • Placing aggregate for shoulders or road widening to grade and slope up to 10’ wide
  • Placing asphalt for shoulders or road widening to grade and slope up to 10’ wide
  • Placing drain rock for trench drains on roadsides
  • Placing aggregate for utility work back filling

Key Features

  • 110 H.P. Cummins engine
  • Contoured strike off
  • 21” wide heat resistant conveyor belt
  • Belt speed 0-466 FPM
  • Hydrostatic drive and traction control system

What our customers are saying

“I've been paving for 3 generations, the absolute best investment we made as company was buying a LeeBoy. If you’re thinking about buying one, stop thinking and make best decision of your life. Thank you LeeBoy. I will be spreading the word!”

- Don Hopkins, D&H Paving, New Jersey, USA

“They put out a very great product. We have a LeeBoy paver and roller. Best of the best right there.”

- Brandon Hersey, Massachusetts, USA

“We’ve been doing asphalt paving since 1975 and owned seven LeeBoy asphalt pavers – from the 700 all the way to the 8816, we would use no other asphalt paver, they are the best machines. Designed with the paving professional in mind, GO LEEBOY OR GO HOME!”

- Robert George, The Asphalt Company, Michigan, USA

“Can’t beat a LeeBoy. They’re tanks. It feels wrong to use any other brand. They last forever and are very comfortable.”

- Nick Stanley, California, USA

“It's nice to see that there are still some American companies out there making equipment that last long and works well. We will definitely be purchasing more equipment from LeeBoy in the future.”

- Scott Flores, Empire Parking Lot Services, California, USA

“I've been running LeeBoy equipment for over 20 years... their pavers truly are "designed with the paving professional in mind "... these machines hold up better than any others!”

- Kevin Piona, Mr. Black Top, California, USA

“I have been laying asphalt for 32 years now. I come from a time when we used to lay asphalt with a ‘dragbox’. I used to dream of a machine like the LeeBoy paver. In my opinion there is no better or labor-friendly machine like the LeeBoy. From the 1000 to the 8515, the work output and quality is simply unparalleled.”

- Frank Cidade, Cidade Blacktop, Massachusetts, USA

“My family business has been using LeeBoy for three generations. When it comes to asphalt, SMI Paving is “LeeBoy Proud” always!”

- Jack Smith, SMI Paving, South Carolina, USA

Find a Dealer
Near You