• Wheelbase: 16’ 2” (4.9 m)

  • Tier 3 - 190 hp (141 kw) @ 2,200 RPM

  • Weight: 33,000 lbs (14,969 kg)

Dimensions

  • Length: 27’ 3” (8.31 m) 
  • Width (shipping): 11’ 11” (3.63 m)
  • Height: 10’ 4” (3.15 m)
  • Wheelbase: 16’ 2” (4.9 m)
  • Total weight: 33,000 lbs (14,969 kg)

Engine

  • Tier 3 - 190 hp (141 kw) @ 2,200 rpm Cummins turbo charged diesel
  • Water-cooled 
  • Battery: 12 volt, 120 amp alternator
  • Electric start
  • Fuel reservoir: 40 gallons (151.4 l)

Strike Off

  • Contoured strike off for controlled spread of material width, depth and slope with minimum side draft and minimum segregation of materials
  • Basic strike off consist of telescoping sections, one 2’ to 3’ (.6 to .91 m), one 2’ (.6 m), one 3’ (.91 m) and one 6’ (1.82 m)
  • Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope
  • Outer edger plate assembly included

Hopper

  • Hydraulically adjustable front hopper lip, adjustment range of 7.75” (197 mm) maximum
  • Two bearing equipped push rollers, truck entry 9’ 4” (2.84 m)

Traction Drive

  • Front wheel hydrostatic planetary drive with electric hydraulic controlled two-speed motor
  • Four-wheel steering
  • Four-wheel drive
  • Independent hydraulic pumps for each planetary drive motor
  • Pumps are interconnected to synchronize drive system
  • Infinitely variable throughout both operating ranges
  • Full reverse in both speed ranges
  • Low range: @ 1,800 rpm – 0 to 1.5 mph (0 to 2.4 kph)@ 2,200 rpm – 0 to 2.5 mph (0 to 4.02 kph)
  • High range: @ 1,800 rpm – 0 to 4.3 mph (0 to 6.9 kph)@ 2,200 rpm – 0 to 6.7 mph (0 to 10.7 kph)

Conveyor System

  • Independent, variable speed, hydrostatic, dual end drive system
  • Two high torque, direct drive hydraulic motors
  • Conveyor speeds: 0 to 795’ per minute (242 mpm)
  • Discharge speed controlled with conveyor speed control knob on operator’s console
  • On/off function controlled with foot switch located at each control station
  • Conveyor belt: 30” (.762 m) wide, high temperature service nitrile belt traveling on tapered roller bearing support rollers
  • Equipped with adjustable wipers to prevent material build up
  • Conveyor assembly able to extend and retract up to 18” (457 mm) hydraulically 
  • Control the direction of conveyor discharge of material at operator’s console from either side of machine

Hydraulic Reservoir

  • 32 gallons (160.8 l)

Operator’s Controls

  • Dual control stations, each equipped with:
    - Direction and speed control lever
    - Foot actuated conveyor function switch
  • Control functions on the operator’s console include:
    - Main power
    - Starter throttle
    - Horn
    - Conveyor speed
    - Shuttle and discharge direction
    - Strike off lift and lateral movement
    - Hopper lip position
    - Steering
  • Analog gauges for engine oil pressure, water temperature, voltmeter and hydraulic oil temperature, digital tachometer and hour meter
  • Main power and starter switches, tail light switch and engine governor control located on the lockable engine instrument panel

Brakes

  • Brake pedal primary braking
  • Parking brake controlled by electric switch on operator’s console
  • Failsafe parking brake

Tires

  • Four 385/65 R 22.5 radial
  • Hydro-inflated, pneumatic tires

Oscillating Push Rollers

  • Two bearing equipped push rollers
  • Mounted on a 9’ 4” (2.84 m) wide oscillating frame
  • Compensates for minor directional misalignment of truck with widener

Optional Equipment

  • Dual strike off group
  • 3’ (.91 m) screed strike off with vibration
  • 6’ (1.82 m) screed strike off with vibration
  • 3’ to 6’ (.91 to 1.82 m) hydraulic strike off extension, right or left
  • 2’ (.6 m) crownable strike off attachment
  • 2’ (.6 m) contoured strike off section
  • 3’ (.91 m) contoured strike off section
  • 6’ (.1.82 m) contoured strike off section
  • 2’ to 3’ (.6 to .91 m) telescoping contoured strike off section
  • Single grade, sonic, TopCon P-32 system
  • Single grade and slope, sonic, TopCon P-32 system
  • Dual grade and slope, TopCon P-32 system
  • Washdown system with hose reel and 7 gallon (26.4 l) tank
  • Second operator’s seat
  • 6.5 kW generator with two 120V AC accessory power outlets
  • Second hose reel kit
  • Rear mounted broom
  • Umbrella
  • Truck hitch

Training, Support and Company

  • Training and support manuals
  • Optional on-site operator training by Dealer
  • One-year, unlimited hours warranty against any manufacturer defects
  • Extended warranty available
  • 50+ years manufacturing experience
  • ISO 9001 Certified
  • Manufactured in the USA

Job Application

  • Placing aggregate or asphalt up to widths of 14’ to grade and slope
  • Placing drain rock for trench drains on roadsides
  • Placing aggregate for utility work back filling
  • Placing concrete for slipform finisher

Key Features

  • 30” wide heat resistant conveyor
  • 190 H.P. Cummins engine
  • Discharge speed controlled with conveyor speed control knob on operator’s console
  • 4 wheel drive and 4 wheel steering
  • Contoured strike off
  • Conveyor speeds from 0-795 FPM

What our customers are saying

“I love LeeBoy pavers. Wouldn’t use anything else. We have a 7000 and a 1000, and looking at an 8500 to buy soon.”

- D. Harrison, Black Rock and Son Paving, Pennsylvania, USA

“I have been laying asphalt for 32 years now. I come from a time when we used to lay asphalt with a ‘dragbox’. I used to dream of a machine like the LeeBoy paver. In my opinion there is no better or labor-friendly machine like the LeeBoy. From the 1000 to the 8515, the work output and quality is simply unparalleled.”

- Frank Cidade, Cidade Blacktop, Massachusetts, USA

“I've been paving for 3 generations, the absolute best investment we made as company was buying a LeeBoy. If you’re thinking about buying one, stop thinking and make best decision of your life. Thank you LeeBoy. I will be spreading the word!”

- Don Hopkins, D&H Paving, New Jersey, USA

“It's nice to see that there are still some American companies out there making equipment that last long and works well. We will definitely be purchasing more equipment from LeeBoy in the future.”

- Scott Flores, Empire Parking Lot Services, California, USA

“They put out a very great product. We have a LeeBoy paver and roller. Best of the best right there.”

- Brandon Hersey, Massachusetts, USA

“My old 8515 laid 510 ton on a church lot in Hopkinsville, KY today. Ain’t even broke a sweat yet, might even stop and do a small drive on the way home. Suns up, “Sons” working. Still as sweet today as the day l bought it.”

- Randy Bennett, Bennett & Sons Paving, Kentucky, USA

“We’ve been doing asphalt paving since 1975 and owned seven LeeBoy asphalt pavers – from the 700 all the way to the 8816, we would use no other asphalt paver, they are the best machines. Designed with the paving professional in mind, GO LEEBOY OR GO HOME!”

- Robert George, The Asphalt Company, Michigan, USA

“My family business has been using LeeBoy for three generations. When it comes to asphalt, SMI Paving is “LeeBoy Proud” always!”

- Jack Smith, SMI Paving, South Carolina, USA

Find a Dealer
Near You