Motor Grader

G-700 Performance Features

L: 21’ 4” (6.50 m) W(shipping): 7’ 8” (2.33 m) H: 9’ 7” (2.90 m)
Tier 3 - 110 hp (82 kw) @ 2,100 RPM
Weight: 17,960 lbs (8,146.5 kg)

Length: 21’ 4” (6.50 m)
Width (shipping): 7’ 8” (2.33 m)
Height: 9’ 7” (2.90 m)
Wheelbase (front tire to mid-tandem) : 15’ 3” (4.66 m)

Total weight: 17,960 lbs (8,146.5 kg)
Rear: 12,600 lbs (5,715.2 kg)
Front: 5,360 lbs (2,431.2 kg)

Traction Drive:
Hydrostatic drive using a hydrostatic pump, drives a variable displacement hydrostatic motor that powers a two-speed tandem axle
Variable volume hydrostatic drive system provides infinite speed selection in each of the two speed ranges
Working range: @ 2,100 rpm 0-10 mph (0-16 mph)
Travel range: @ 2,100 rpm 0-20 mph (0-32 kph)
Tandem oscillates ± 15⁰
Choose between tandem and all-wheel drive
Dana style gear tandem driven, not chain

Front Axle:
Fully welded steel, tubular design
Oscillation: 40⁰ total, supported by tapered roller bearings and bushings
Wheel lean: 10⁰ left or right (20⁰ total)
Clearance: 22” (.559 m)

Length: 10’ (3.04 m)
Height: 21” (.533 m), controlled by two hydraulic cylinders mounted to ball joints at turntable
Cutting edge thickness: .625” (16 mm)
Replaceable end bits and cutting edge standard equipment
Cuts 17” (.43 m) below grade

Blade Range:
Lift above ground: 12” (.304 m)
Pitch at ground: 45⁰ tilt
Blade slide: 36” (.914 m) left or right

4” (101.6 mm) x 4” (25.4 x 101.6 mm) solid

Articulated Frame:
Steel channel, rectangular tubing
Articulated 24⁰
Pivot 4” (101.6 mm) diameter, supported by 4 tapered roller bearings
Turning radius: 21’ 5” (6.527 m) from center to outside front tire with frame articulated

Additional Standard Equipment:
Moldboard float control
Fail safe brake
Backup alarm
Front and rear turn signals
Four-way flashers
Head lights and work lights
Full fabricated cab , includes heater, defroster, air conditioner, radio, front and rear window wipers
Audible warning low oil and water temperature
Safety beacon
Cup holder
Vandalism package

Tier 3 - 110 hp (82 kw) @ 2,100 rpm Cummins turbo diesel engine
Water-cooled, EPA certified
4 cylinders, 270 cid (4.4 l)
Electric start
Fuel reservoir: 35 gallons (132 l)
Hydraulic system: 21 gallons (79 l)

Two 12 volt batteries

Six 15 x 19.5, TL, G-2
8 ply
Pneumatic tires

Foot operated primary and service brakes
Secondary brake accomplished by dynamics of hydrostatic traction drive system
Hydraulic parking brakes, internal element of the planetary final drive unit, actuated by a selector valve
Spring applied parking brakes automatically actuated when the ignition switch is in off position

Blade Lift Mechanism:
Each trunnion is mounted to the frame by dual tapered roller bearings in sealed housings

Moldboard Turntable:
Circle centered with three adjustable alignment blocks with removable shims
Diameter: 3’ 3” (.838 m)
Circle rotates 90⁰ by two hydraulic cylinders

Fuse panel
Fuel gauge
Engine oil pressure gauge
Hour meter
Automatic shutdown for low oil pressure or high water temperature
Hydraulic oil level, sight gauge with temperature
Air filter restriction indicator

Operators Area:
Fully cushioned, adjustable suspension seat with seat belt
Adjustable console controlling left and right-hand blade lift, front blade lift, moldboard side shift, moldboard tilt, circle turn, circle shift, articulation, front wheel lean and rear mount attachment control
Console provides the operator control of steering
All gauges are easily readable

Water jacket heater
Rear mount scarifier (in lieu of front)
7’ (2.13 m) front blade with 4 shank scarifier
8’ (2.43 m) front blade with 4 shank scarifier
11’ (3.35 m) moldboard
12’ (3.65 m) moldboard
Foot accelerator
Front tow hitch on blade [must order 7’ (2.13 m) or 8’ (2.43 m) front blade]
Foot operated FNR pedal

Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in the USA