Max 3B.png

Distributor
Maximizer 3B

Maximizer 3B Performance Features

Controls: Plus+1 CAN Bus
Viking Asphalt Pump
Tank Size: 1,050 to 4,250 gallons (3,974 to 16,088 l)

Dimensions:
Length: Depends on type of truck purchased and options selected
Width: Depends on type of truck purchased and options selected
Height: Depends on type of truck purchased and options selected
Weight: Depends on type of truck purchased and options selected


Capacity:
1,050 to 4,250 gallons (3,974 to 16,088 l)*

*Gallons listed are maximum tank capacities. Recommended tank capacities may be limited by 1.) Thermal expansion of materials. 2.) Density of materials. 3.) Truck/axle load ratings. For more detail, please contact your local Rosco Sales Representative or Dealer.


Surge Plates:
10 gauge (3.4 mm) steel with staggered openings to provide adequate tank strength and proper surge control


Manhole:
Weather tight and safety relieving cover with basket-type strainer
Inside splash guards
Steel measuring stick
Tank vent and overflow
Manhole opening: 22” (.559 m) in diameter
Overflow: 3” (76 mm) in diameter


Sump:
At the rear of tank
Cleanout plug and suction line from the pump includes tank cutoff valve
Sump size: 4” (102 mm) in diameter


Distributing Lines:
High temperature, flexible metal hoses
Steel pipe with ball and socket joint is not acceptable


Controller:
Plus+1 CAN Bus control and onboard diagnostic system
DP 700 [7” (177.8 mm), 800 x 480 pixel) high-resolution, color graphic display
Controller for automatic application rate control
Automatic valves for cab control of distributor functions
Exclusive enviro-flush system with hydraulic pump speed control
Settings for flow, speed calibration, spraybar width and spray bar on/off control by section
Automatic valves for cab control of distributor functions
Capable of storing up to 12 preset combinations of application rates and flow calibrations for instant retrieval
Selectable readouts include FPM, GPM, total feet sprayed, total gallons sprayed, total square yards sprayed, flow and speed calibration, application rate, tank temperature, hour meter and spraybar width (English and metric units can be selected for the rate controls)
Controller provides accurate applications regardless of changes in speed or spraybar width during operations
Includes GPS ground speed sensor
Convenient external controls mounted on rear fender


Optional Equipment:
Installation for a customer supplied truck chassis
PTO transmission (required if not using front live power)
LPG burner in lieu of diesel burner [includes 52 gallon (197 l) LP tank]
Diesel burners with electronic ignition, 100% outfire protection and heat control
Heated asphalt pump
Washdown system with pump and hose, self-winding hose reel
Loading hose, 3” x 15’ (76 mm x 4.572 m) flexible steel with quick couplers
Loading hose, 3” x 15’ (76 mm x 4.572 m) rubber with quick couplers
Electric overnight heat
Radar horn in lieu of GPS

Tank:
Meets all applicable Federal DOT tank regulations
ASTM A569 grade mild steel with minimum 10 gauge (3.4 mm) shell and 7 gauge (4.5 mm) flat heads
Flanged reinforced and welded to shell inside and outside of tank
Seams are all electrically welded
Thermometers: One 4” (102 mm) dial thermometer
One internal pencil thermometer


Insulation:
2” (51 mm) rock wool with spacers to prevent compression
Clips to secure position of insulation and protected by an aluminum jacket


Heat System:
Two diesel fired burners with electric ignition and heat limit controls
Two, u-type, high temperature flue pipes running the length of the tank
Single exhaust stack is constructed of stainless steel and includes a rain cover
Heating flue size: 8” (203 mm) in diameter throughout
Burners: 560,000 BTU per burner, per hour capacity


Asphalt Pump:
Viking, positive displacement pump
Rotary gear type with built-in relief valve for safety
Asphalt pump driven by low speed high torque fixed displacement hydraulic motor and connected by a flexible coupling
Pump: 400 gallon per minute (1,514 l per minute)


Clean Out:
Enviro-flush system allows solvent circulation through asphalt pump, valves, distributing lines and spraybar
Cleanout material returned to enviro-flush tank for later use or disposal
Flush tank: 25 gallons (95 l)
Enviro-Flush tank: 25 gallons (95 l)


Spray System:
Nozzles are brass, slotted and valves are non-cloggins
Each has a quick-disconnect feature allowing the operator to change spray widths in 4” (102 mm) increments across the entire bar without the use of tools or blank nozzles
Spraybar: 16’ (4.876 m) full circulating, extendible spraybar
Two 8’ (2.43 m) independently controlled sections
Each spray nozzle automatically turns on when extended and off when retracted
All functions operated by the Plus+1 controller in the cab
Nozzles: Spaced on 4” (.102 m) centers on spraybar


Transmission:
Hydrostatic, front live power driven by engine crankshaft
The hydrostatic pump is an infinitely variable, displacement axial piston pump
Hydraulic reservoir: 20 gallons (76 l) with thermometer and sight gauge and level indicator


Additional Standard Equipment:
Hand spray wand with a 25’ (7.6 m) rubber hose
Front and rear dial contents gauge
4” (102 mm) dial thermometer and internal pencil thermometers
ICC clearance lights and reflectors
Rear bumper to protect spraybar
Sample valve
Back-up alarm
Mud flaps
Ladder and platform assembly
Grease gun


Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in the USA