6150 .png

Asphalt Paver

6150 Performance Features

Tier 4 Final – 74hp (55kW) @ 2,200 RPM
Weight (with screed): 18,180 lbs. (8,246 kg)
Paving Widths Variable Up To 15’ (4.57 m)

Length: 16’ 6” (5.03 m)
Width: 8’ 6” (2.59 m) transport
10’ 7” (3.21 m) hopper wings down
Height: 7’ 8” (2.34 m)
Total Weight (with LP screed): 17,550 lbs. (7,960 kg)

Conveyor fed
Side wings hydraulically fold in or out
Hopper size: 7 ton (6,350 kg)
Hopper height: 22” (.559 m)

Legend propane screed
8’ (2.43 m) main screed
Constructed of .375” (9.5 mm) AR 400 bolt-on wear plates for easy replacement

Screed Extensions:
Two 44” (1.18 m) screed extensions hydraulically actuated to a width of 15’ (4.57 m)
The heated extensions are mounted flush with the main screed and are adjustable with the angle of attack
Includes replacement .25” (6.35 mm) AR 400 bottom wear plates

Under Auger Material Cutoff:
Two independent hydraulically operated 4' (0.051 m) wide gates located under the augers and constructed of at least .375" (.009 m) A-36 plate steel

Material Augers:
Two 12” (.305 m) replaceable segmented augers constructed of casted .625” (.016 m) thick Ni-hard steel
Augers can be controlled automatically by sonic sensors (non-contacting)

Dual electronic steering wheels with joystick for forward, reverse operation
Allows driver control from right or left side of paver

Washdown System:
Heavy-duty electric pump with two 25’ x .375” (7.62 x .009 m) diameter hose reels and spray nozzles
Washdown Tank: 7 gallons (26.4 l)

Hydraulic System:
Variable volume hydraulic pumps for each drive
Fixed volume gear pump for augers and general functions
Fixed volume gear pump for conveyors
Fixed volume gear pump for generator and steering
Hydraulic reservoir: 36 gallons (140 l)

Additional Standard Equipment:
Back-up alarm
Lockable fuel and hydraulic caps
Rotating LED safety beacon
LED work lights
Electronic gauge package (oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, hydraulic level warning, engine diagnostics)

Optional Equipment:
Legend electric heated screed, variable up to 15’ (4.572 m), 10 kw generator
Heavy-duty Legend electric heated screed, variable up to 15’ (4.572 m), 10kw generator
S-curve elements (Legend HD screed only)
Heated end gates (Legend HD screed only)
3:1 flight screw adjusters (Legend HD screed only)
12” x 4.5” (.304 x .11 m) berm extension, left and right (Legend HD screed only)
Sloping screed extensions
Truck hitch
Umbrella: 1 or 2
Power crown
Wiring only, grade controls, includes A/M module Sonic grade control both sides
Dual sonic grade (Topcon System P-32)
Dual sonic grade and slope (Topcon System P-32)
20-foot ski (6.096 m)
30-foot (9.144 m) to 40-foot ski (12.192 m)
12" (0.304 m) auger extensions (right and left)
24" (0.610 m) auger extensions and shields (right and left)

Kubota turbocharged diesel
Tier 4 Final – 74hp (55 kw) @ 2,200 RPM

Fuel: 36 gallons (140 l)
Hydraulic: 36 gallons (140 l)

Paving Widths:
Machine has variable paving widths up to 15’ (4.6 m)

Paving Depths:
Depth: 0” to 6” (.152 m)

Screed Heat (Propane):
Two 54,000 BTU propane burners on main screed
Each extension has one 36,000 BTU propane burner
One 36,000 BTU burner ignitor

Screed Vibration:
Equipped with two hydraulic vibrators capable of producing 2,000 vibrations per minute

Screed Crown/Invert:
Equipped with a crown/invert adjustment allowing at least 2” (76.2 mm) of crown and .75” (19.05 mm) of valley
Includes a leveling indicator for the operator to know when the screed is level

Screed End Gates:
Equipped with vertical height adjustment and tilt

Operator’s Platform:
Full machine width platform with dual seats

Operator’s Controls:
High deck/low deck configuration
Dash panel is movable from left to right and contains all machine controls
Pivot steer and posi-trac
Equipped with auger and conveyor bypass

Push Rollers:
Two 3" (0.076 m) diameter rollers with sealed bearings mounted on a swivel frame
Vertically adjustable push rollers, 7” (.178 m) of height adjustment

Wheeled Drive System:
Hydrostatic drive with 2-speed hydrostatic motors
Rear: 385/65 R22.5 heavy-duty hydroinflated truck tires
Front: steerable wheels, 12” x 22” (.304 x .558 m) diameter solid rubber tires
Paving speed: 0 to 228’ per minute (2.6 mph)
Travel speed: 0 to 660’ per minute (7.5 mph)

Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in the USA