CSH.png

Chip Spreader
CSH

CSH Performance Features

Aggregate Delivery: Fixed
Tier 3 - 202 hp (150.6 kw)
Weight: 13,380 lbs (6,069 kg)

Dimensions:
Overall Length: 24’ 6” (7.47 m) with hopper
Overall Width: 9’ 6” (2.896 m) no hopper
Overall Height: 8’ 4” (2.54 m)
Wheelbase: 10’ 6” (3.2 m)
Turning radius: 20’ 6” (6.248 m)


Shipping Information:
Length: 21’ 11” (6.42 m)
Width: 9’ 6” (2.89 m) no hopper
Height: 8’ 4” (2.54 m)
Weight: 13,380 lbs (6,069 kg) with 10’ (3.04 m) hopper


Spread Hopper:
10’ (3.04 m) to 15’ (4.57 m) hopper
Optional individual gate controls that are operated from the control station via electric over hydraulic
Hopper has 2.375” (60.325 mm) agitator
Spread roll diameter of 6.625” (168.275 mm), 0.25” (6.35 mm) thick wall
Spread roll maximum speed 132 rpm’s
Full length rejection screen on the spread hopper, maximum opening of 1” (25.4 mm)


Rear Hopper:
Two independent manual flow control gates easily accessible from operator’s station for the conveyors
Skirting in the receiving hopper to minimize spillage
Capacity: 4 cubic yards (3.05 cubic m) struck
Receiving width: maximum 11’ 10” (3.6 m), minimum 9’ 6” (2.89 m)


Conveyor Belts:
Two independently operated, aggregate feed conveyors
Adjustable tail pulleys with pillow block style bearings, grease zerks for each bearing
Auto and manual system controlled from touch pad system integrated with Plus+1 system
Belt width: 20” (.508 m)
Speed: 0 to 550’ per minute (167.64 m per minute)


Truck Hitch:
Electric over hydraulically adjustable
Electronically controlled from the driver’s station
Electronic over hydraulic released locking mechanism


Control Functions:
Hydrostatic control system
Manual mode: Operator can vary forward/reverse speeds of unit with joystick
Speed ranges: 0 to 19 mph (0 to 30.5 kph), high range
0 to 10 mph (0 to 16 kph), low and reverse ranges
Application rate control:
- Computer monitors the actual speed of the spreader, varies gate opening to maintain the set application rate
- Plus+1 CAN Bus system with auto-rate control monitors actual speed of the spreader regardless of load conditions
- Programmable application rate in lbs per sq. yard
- Include rock size, type, chipping width, feet per minute and accumulative totals
- Ability to access memory settings service screens, system faults, engine faults, machine settings, calibration settings and display units in English or metric
- Control switches for the working lights, turn/hazard signals and beacons


Steering:
Fully hydraulic, orbital type
Independent of drive system


Brakes:
Two wheel drive: Front axle hydraulic multiple wet disc type
Rear axle hydraulic actuated brakes, spring applied and hydraulic released

OR

OPTIONAL Four wheel drive: Front and rear axle hydraulic multiple wet disc type


Additional Standard Equipment:
10 ‘ (3.04 m) hopper with manual gate controls
Two wheel drive, front wheel drive
Color graphic display
Auto rate controls
Remote walkway controls


Optional Equipment:
11’, 12’, 13’, 13’ 6”, 14’, 15’ (3.35 m, 3.65 m, 3.96 m, 4.11 m, 4.26 m, 4.57 m) aggregate spread hopper
11’, 12’, 13’, 13’ 6”, 14’, 15’ (3.35 m, 3.65 m, 3.96 m, 4.11 m, 4.26 m, 4.57 m) aggregate spread hopper with individual gate controls
Front hopper walkway and railing (all widths)
Amber strobe light, handrail mounted
Umbrella for each operator’s station

Engine:
Tier 3 - 202 hp (150.6 kw) CAT engine
Belt driven engine cooling fan
Fuel filter, fuel filter water separator
12 volt negative ground system
Dual 1000 amp, 12 volt batteries
Dry type dual air cleaner system with indicator
Fuel consumption rate of 13.3 gallons per hour (50.34 l per hour)
Electrical variable controlled engine throttle


Hydrostatic Pump Drive:
Single H1 electric controlled pump
10.07 cubic in (165,017 cubic mm) rev designed to provide optimum traction for two or four wheel drive system
Hydraulic pump has pressure compensating pump for auxiliary systems
Hydraulic reservoir: 50 gallons (189 l)


Auxiliary Pump System:
Capacity to operate the hydraulic gate cylinder, orbital steering system, conveyors and spread roll on aggregate hopper
Auxiliary circuits have minimum 700 psi relief setting for the hydraulic gate cylinder
1,300 psi orbital steering
2,500 psi conveyor


Front Axle:
25,000 lbs (11,339 kg) rated capacity, oscillating type
24.98:1 ratio, wet disc brakes, 5,400 lbs (2,449 kg) application
Powered by 9.82 cubic in (160,921 cubic mm), rev two-speed hydraulic drive motor
Automotive type, drive shaft axle connection between axle and hydraulic drive motor


Rear Axle:
Two-wheel drive system
Minimum 22,500 lbs (10,205 kg) rated capacity
16.5” (.419 m) diameter, 7” (177.8 mm) wide brakes, manual slack adjusters
Drum type brakes, spring applied and hydraulic released
Minimum 7” (177.8 mm) ground clearance

OR

OPTIONAL REAR AXLE:
Four-wheel drive system
Minimum 32,000 lbs (14,514 kg) rated capacity
16,000 lbs (7,257 kg) torque hubs for traction assistance
Electronically controlled rear torque hubs from operator’s control station
Spring applied and hydraulic released brakes
Minimum 7” (177.8 mm) ground clearance


Tires:
Tire tracking front: 6’ 11” (2.1 m)
Tire tracking rear: 7’ 7” (2.31 m)
Tires standard size: 385/65R 22.5
Tires special: 255R/70 x 22.5, low profile
Tires optional: 11:00 R x 22.5 radial
Wheels: Budd-disc style


Operator’s Area:
One control console easily moved from left to right sides
Appropriate foot brake control
Parking brake electronically controlled on main control console
Operator’s deck walkway on right, appropriate controls for second operator to monitor conveyors and spread hopper
Toolbox and access to engine and hydraulic components accessible from operator’s deck
Cushioned and adjustable seat


Instrumentation:
Monitored thru DP 610 LCD display
Gate controls, working lights, turn signals, hazard lights and beacon to be separated from Plus+1 system
Plus 1 Monitor:
- Plus+1 CAN Bus control and onboard diagnostic system
- DP 610, 6.5” (165.1 mm), 400 x 240 pixel color graphic display
- Gauges include engine water temperature, engine oil pressure, tachometer, fuel gauge, voltmeter, hydraulic temperature, hour meter and volt meter


Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in the USA